E-Series – All Electric Lubrication Systems

All-electric lubrication systems for conveyors –no air required

Electric-Only Lubrication – reliable and efficient operation

The ChainMaster E-Series Lubrication Systems are all-electric and designed to deliver metered amounts of lubricant in solid shot form to conveyor wear points. The lubricant shots are discharged from nozzles which are rigidly mounted close to the moving wear points.

The system consists of a reservoir/pump, controls assembly, and a sensing and delivery assembly.  The reservoir/pump and controls assembly includes the integral lubricant reservoir, the electronic controls and the pump module. The sensing and delivery assembly includes one or more target sensors, nozzles and tubing for lubricant delivery and all brackets.*

*Units supplied in kit form include proximity switch and nozzle brackets only.

Reservoir/Pump And Controls Assembly

Features / Benefits

• Solid shot lubricating designs available for a wide variety of moving points, chains and conveyors

• Reduce downtime due to premature conveyor wear

• Eliminates surging caused by non-lubricated conveyor components

• Available in kit form for general purpose use

• Low-cost installation

• Conveyor runs smoother, keeps product form swaying, reducing possibility of damage to product and injury on the line

• Delivers a wide viscosity range of lubricants

• Reduces drive-power requirements

• Integral 5-gallon reservoir

• No waste or contamination – a metered amount of lubricant is cleanly and precisely delivered to the wear points

• Independent operation or centralized fill

• Built-in power-on and low-lubricant-level status lights

E-Series Specification Sheet

Standard Components – the heart of the E-Series

• Adjustable volume/velocity positive displacement piston pump(s)

• Integral 5-gallon lubricant reservoir

• Power-on and low-lubricant-level status lights

• Low-lubricant-level isolated contacts and automatic shut-off circuit

• ChainMaster lubricator controller-keypad-programmable,digital- readout, multi-function counter*

*Optional on general purpose kit systems

Optional Equipment – increase ease of operation

• Remote-fill control valve

• 5-, 16- or 55-gallon remote-fill pump*

• Drip pans and mounting brackets

*Remote-fill pumps may be used as centralized supply pumps to multiple E-Series lubrication systems

Control Options

• Programmable 1000-hour timer with cycle progress display

• 12-hour manual-on, automatic-off timer

• Manual on/off switch*

• Electronic on/off design for PC interface

*Standard on general purpose kit systems.

Overhead Conveyors

Conveyor Type	Model
Monorail or Power & Free Chain	OP-47E
Monorail or Power & Free Power Trolley Wheels	OP-47E
Free Trolley Load Wheels	OP-9E
Free Trolley Guide Rollers	OP-9E
Free Trolley Dog Actuator & Pivot Pins	OP-9E
Enclosed Track Chain and Wheels	OP-41E
Enclosed Track Power & Free Power Chain and Wheels	OP-48E
Enclosed Track Free Trolleys	OP-9E
Cable Conveyor Trolleys	OP-47E
Cable Conveyor Cable Joints	OP-47E

Inverted Conveyors

Conveyor Type	Model
Power & Free Power Chain	OP-10E
Power & Free Power Trolley Load Wheels	OP-10E
Free Trolley Load Wheels	OP-9E
Free Trolley Guide Rollers	OP-9E
Carrier King Pins	OP-9E
Enclosed Track Power & Free Power Chain and Wheels	OP-48E
Enclosed Track Free Trolleys	OP-9E

Floor Conveyors

Conveyor Type	Model
Chain on Edge Drag Lines	OP-10E
Chain on Flat	OP-40E
Single Strand CC5 Chain	OP-40E
Double Strand CC5 Chain	OP-40E
Single Strand CC5 Roller Flight	OP-40E
Double Strand CC5 Roller Flight	OP-40E
Inboard Roller Chains	OP-40E
Towveyor Chain	OP-40E
Towveyor Trolley Wheels	OP-40E
Pedestal Conveyor Chains	OP-40E
Pedestal Conveyor Wheels	OP-40E
Flat Top Chain & Drive Bushings	OP-40E
Slat Conveyor Chain & Drive Bushings	OP-40E

OP-52 / OP-53 Conveyor Caterpillar Drive Chain Lubricators

Cost-effective orifice lubrication for conveyor drive, short transfer and machine chains

Features/Benefits

Delivers a precise volume of lubricant per stroke with positive displacement pump

Controls lubrication cycle frequency and duration accurately with programmable solid state adjustment timer

Installs easily – pump and controls assembly requires four (4) mounting bolts and one (1) electrical connection

Constructed of durable molded plastic or fabricated metal for harsher environments

Operates cleanly and affordable to save time, work and money

Simple start-up and testing procedures with manual-run push-button

Delivers most fluid lubricants

Lubricates drive chains effectively to extend drive and conveyor chain life

OP-52/OP-53 Specification Sheet