Lubricants

Posted by admin on June 16 2010 Add Comments

Click here for Technical Data SheetClick Here for Technical Data Sheet

WearMaster® Lubricants

Do you have excessive build-up on your conveyor chain? Are you experiencing premature chain wear? You may benefit from changing the type of lubricant you are using. Using the right lubricants and matching the lubricant to the conveyor can save money lost to wear, downtime and extra energy consumption. A complete line of lubricants have been developed for all conveyor applications, designed to keep your system running smoothly.
`
Recognized worldwide as lubrication systems specialists, we have years of experience in every aspect of conveyor lubrication; from equipment design, sales and installation to lubricant sales, systems service, consultation and custom problem-solving. As a result, we’re familiar with your needs and concerns. We can supply you with the WearMaster lubricants that will provide the best results in your conveyor system.

Lubricants


Lubricant Flash Point Type Advantages
KF 25 122°F MoS2 Dry Film Bonded Lubricant
Click Here for Technical Data Sheet
KF 35 158°F MoS2 Dry Film Lubricant – higher flash point
Click Here for Technical Data Sheet
KF 36 136°F MoS2+ Graphite Can be used in temperatures up to 700°F
Click Here for Technical Data Sheet
KF 39 130°F Silicone FDA approved for use in areas of possible
incidental food contact
Click Here for Technical Data Sheet
KF 100 554°F Polyol Esters High temperature, ashless, synthetic lubricant
Click Here for Technical Data Sheet
KF 100LT 445°F Polyol Esters Similar to KF 100, with lower viscosity
Click Here for Technical Data Sheet
KF 100VT 554°F Polyol Esters KF 100 with an added Violet Tint
Click Here for Technical Data Sheet
KF 100LTVT 445°F Polyol Esters KF 100LT with an added Violet Tint
Click Here for Technical Data Sheet
KF 101-220 604°F Polyol Esters Ashless, water-washout resistant
Click Here for Technical Data Sheet
KF 101-220VT 604°F Polyol Esters Same as KF 101-220 with an added Violet Tint
Click Here for Technical Data Sheet
KF 102 456°F Polyglycol High-Temperature, ashless, and water-soluble
Click Here for Technical Data Sheet
KF 245 464°F Petroleum For severe industrial applications where high loads and ambient
conditions cause premature wear and failures
Click Here for Technical Data Sheet
KF 270 482°F White Oil USDA H1 Lubricant
Click Here for Technical Data Sheet
KF 272 367°F White Oil USDA H1 Lubricant
Click Here for Technical Data Sheet
KF 310 410°F475°F Petroleum Lubricating oils for use in various machine tool applications
Click Here for Technical Data Sheet
KF 330 435°F464°F Petroleum High performance industrial gear lubricants
Click Here for Technical Data Sheet
KF 350 385°F518°F Petroleum Hydraulic Fluids
Click Here for Technical Data Sheet
KF 360 305°F-315°F Polyol Ester Food Grade Oven Chain Lubricants
Click here for Technical Data Sheet

Greases


Grease Key Benefit Base Advantages
KG 450 High dropping point, good mechanical stability, and high temperature oxidation makes it the best multipurpose grease in plants with high temperature requirements


Lithium Complex High Temperature Extended Performance
Polymer Grease
Click Here for Technical Data Sheet
KG 451-0 Outstanding water resistance, with sever shock loading, and tough protection against wear, corrosion, and high temperature


Lithium 12-hydroxy Super water resistant grease NLGI Grade 0
Click Here for Technical Data Sheet
KG 451-2 Outstanding water resistance, with sever shock loading, and tough protection against wear, corrosion, and high temperature


Lithium 12-hydroxy Super water resistant grease NLGI Grade 1.5
Click Here for Technical Data Sheet
KG 452 High Water Resistance, Film Adhesion, and Wear Protection with environmentally friendly mineral solvent instead of chlorinated solvents


Aluminum Complex Synthetic Open Gear Compound
Click Here for Technical Data Sheet
KG 453 Complete corrosion control both as a lubricant and as a protective coating in areas of high salt and chemical contamination


Calcium Complex Corrosion Control Grease
Click Here for Technical Data Sheet
KG 455 540º F Dropping Point Polyurea High Temperature / NLGI Grade 2 / USDA
H2 Grease
Click Here for Technical Data Sheet


KG 460 590º F Dropping Point Synthetic Extreme High Temperature, High
Pressure Grease
Click Here for Technical Data Sheet


KG 470 Water resistance, oxidation stability and anti-wear protection that allows uses in applications thought unacceptable for ordinary food grade greases.


Aluminum Complex H1 High Performance Food Grade Grease
Click Here for Technical Data Sheet


KG 475 High Water Resistance, Film Adhesion, and Wear Protection

Aluminum Complex Synthetic Open Gear Compound Grease
Click Here for Technical Data Sheet
KG 458 Oxidation Stability at 210ºC, No Reaction (ASTM D5483)

PTFE
Polytetrafluoroethylene (PTFE) thickener,
perfluoropolyether (PFPE) base oil,
Molybdenum Disulfide
KG 459 Oxidation Stability at 210ºC, No Reaction (ASTM D5483) PTFE

Polytetrafluoroethylene (PTFE) thickener
with a perfluoropolyether (PFPE) base oil
Click Here for Technical Data Sheet


KG 490 650º F Dropping Point PAO Synthetic 100% PAO synthetic high-temperature grease
with an inorganic based and non-melting
thickener
Click here for Technical Data Sheet

Comments are closed.